The Spray Gun has an additional safety feature; the lever catch can be used to lock the lever closed
to prevent accidental spraying. The catch can also be used to lock the lever open for continuous
spraying. This should only be done when safe to operate in this manner and where there is no
likelihood of inadvertently spraying any person or property that may suffer damage.
After spraying is completed, drain unused chemicals from the tank. Rinse the tank with clean water
then operate the sprayer with clean water in the tank to clean out the pump, hose and spray lance.
Do not leave chemicals in the tank as they may crystallize or form solids in the pump, spray lines and
block the filter.
If heavy frosts are experienced, run the sprayer until the pump and spray lines are dry. This will
prevent water freezing in the pump or spray lines and damaging the sprayer.
Warning!
Dispose of unused chemical and water used for rinsing in a manner that will not endanger
people, animals or the environment in accordance with local regulations and the handling and
disposal information available from the Chemical manufacturer.
CLEANING THE FILTER
To avoid chemical contamination, wear appropriate protective equipment including gloves
whenever maintenance is carried out; turn off the pump and depress the trigger on the spray lance
to dissipate any pressure.
The TrayLink features two filter/strainers that require cleaning. Beneath the lid of the tank is a
basket strainer for stopping coarse debris from entering the tank and mounted next to the pump is
an inline filter. Remove the filters to clean them, unscrew the lid to lift out the basket strainer and
unscrew the filter housing and remove the element, clean both with clean water and a bristle-brush,
do not use a wire brush or sharp object as this may damage the mesh.
Operation (cont.)
Service & Maintenance
