GENERAL:
The Silvan TrayLink sprayer is powered by a large capacity 12V pump and mounted on a TPL style frame
suitable for a small tractor while also allowing for it to be deployed to a variety of vehicles and platforms. The
TrayLink is designed for applying agricultural chemicals such as pesticides, insecticides, herbicides or fertilizer.
PUMP:
12-Volt
DC
electric,
self-priming
positive
displacement diaphragm pump with electric
pressure sensing switch.
Flow: 15.5L (at 30psi or 2 bar)
Valves: Viton
Diaphragm: Santoprene
Duty Rating: Continuous up to 40psi (at 21ºC
ambient)
Max Current: 18 amps
Max Pressure: 60psi (set by pressure switch)
The heat rise chart indicates (in the greyed area)
the conditions where this pump can operate under
a
continuous
duty
cycle
when
ambient
temperatures are 21º Celsius or less.
Note
when
current draw is greater than 13amp at 21º the duty
cycle is rated as intermediate.
LID:
(K02A) 240mm Screw down lid with breather
(K03A)/(K03A-19B) 255mm Screw down lid with
breather
BOOMLESS NOZZLES:
Fitted with two Boomless Nozzles mounted to a
swivel nozzle holder allowing easy adjustment of
the angle of the nozzle to control spray pattern and
swath width. Each one nozzle covers a swath of
5.18m when 1.2m above the ground when spraying
at 40psi (two nozzles can cover a 9m swath). The
Nozzle mounting can be positioned on the rear or
side of the frame to allow for use of sprayer from a
tray or mounted by TPL connections.
TANK:
200L and 300L capacity rotationally moulded
translucent polyethylene tank, U.V. stabilized and
impact resistant with calibrated fill mark moulded
into the tank. Contains sump with drainage and
special tank wall section that clips into frame for firm
hold of tank.
FRAME:
(K02A) Compact design of steel construction holds
the 200L tank with a lower weight and centre of
gravity to improve handling. Durable black powder
coat finish with two mounting points for Boom-less
nozzles, hose holder and CAT I linkage points.
(K03A) Galvanised steel construction for long life,
holder for hose and spray lance and CAT I linkage
points. (K03A-19B) Field boom
–
galvanised steel
truss. 6 metre, three section horizontal fold.
HANDGUN AND LANCE:
6m hose with Spotjet Spray gun with 600mm Stainless
steel lance with adjustable nozzle.
FILTRATION:
1.
Basket strainer under lid
2.
Suction filter with Removable element
DIMENSIONS:
(excludes Boomless Nozzles fitted to frame)
K02A
K03A
Length (mm)
1040
1070
Width (mm)
760
830
Height (mm)
745
1060
Weight (dry) (kg)
44
72
Nominal Capacity (L)
200
300
The Boomless spraying adaptor adds an additional
140mm to the Length or width when mounted to the
side or back of the frame respectively with 6m boom
folded.
CONTROLS:
The TRAYLINK provides three ways to control output.
1. Two manual section valves one too the boom less
nozzles and the other to the spot spraying lance.
2. A proportional regulating valve with graduated dial
and pressure gauge allows adjustment of application
and tank agitation rates (Contains EPDM seals).
3. The power loom contains a small control box with
remote on/off switch and 20-amp fuse to allow pump
to stop boom-
less spraying from a driver’s seat or cab.
Specifications
