Silva ADC Wind, User Manual

Page: 25 / 344

Wind Speed Mode -
Setting the Wind Speed Alarm and Time Span
To Set the Wind Speed Alarm, and Time Span
for Average Wind Speed Calculation
!
!
!
!
!
!
To set the wind speed alarm, press and hold
the [mode] button for about 2 seconds to
select the setting display (wind speed starts
flashing).
When the 'wind speed' is flashing, press the
[mode] button to select between time span
setting and wind speed alarm setting.
When 'wind speed' is flashing, press the
[reset] button to scroll the target wind speed
level by 1 step (hold down the button to
scroll the setting faster). To select the wind
speed alarm between ON and OFF, press
the [set] button.
When 'time' is flashing, press the [set] or
[reset] button to scroll the target time span
for average wind speed calculation by 1
(hold down the button to scroll the setting
faster).
Press and hold the [mode] button for about
2 seconds to exit the setting sequence.
The setting display will change to Wind
Mode automatically if no key-stoke has
been activated for about 1 minute.
10.7
Wind Speed Mode
18.3 8.3
WIND mph
21.3
Wind Speed
Alarm
Time Span
Setting
hold
[mode]
hold
[mode]
[mode]
scroll
the setting
faster
Wind Speed Alarm and
Time Span Setting Sequence
Time Span
Setting
SEC
WIND mph
10
AVG PERIOD
[reset] [reset] hold [reset] hold [reset]
[set]
18.3 8.3
WIND mph
50.3
ON
18.3 8.3
WIND mph
- - - -
OFF
Alarm ON Alarm OFF
Wind Speed Alarm Setting
flash
scroll through
the settings by
increment
scroll
the setting at
a faster pace
scroll through
the settings by
decrement
scroll
the setting at
a faster pace