background image

- 12 -

• When the <   > symbol lights on, the ice maker will turn 

off by itself and it will turn on by itself if you take the 

ice cubes away from the water tank.

3. How To Set The Thickness Of The Ice Cubes

Press the “+” or “-”  buttons to set the time of the 

ice-making process. The more time it takes, the 

thicker ice cubes it will produce. 1 minute adjustment 

for each press of the “+” or “-” buttons. 

Please Note: 

• You can increase the time up to 6 minutes. 

• This can only start from the new ice-making cycle.

• If you restart the ice maker again, it turns into the default setting 0. You 

need to re-set the ice-making time.

4. How To Harvest The Ice Cubes During The Ice-making Process

Long press the button “ON/OFF” more than 5 seconds 

when the ice maker is working, the unit will start to 

harvest. Press “ON/OFF” button again, the ice maker 

will turn off.

5. How To Use The Self-cleaning Function

Start the self-cleaning program: 

Plug on the unit, and 

press the “TIMER/CLEAN” button for more than 5 

seconds to enter the self-cleaning program which 

takes 20 minutes. the symbol <     > rotates on screen 

window, the countdown area at the left top displays 

20M. 

Cancel the self-cleaning program: 

It takes about 20 

minutes to complete one self-cleaning program. When 

the program is over, the system will be in off-state 

automatically. And also you can press the “ON/OFF” 

button to cancel the self-cleaning program by force.

6. How To Set The Timer

①. Press the “TIMER” button, and the display will show 

<       >.

②. Then press “+” and “-” buttons to set the time. 1 

hour adjustment for each press of the “+” or “-” 

buttons. During the setting, the <H> is flashing. The 

<H> will keep on after 5 seconds which means setup 

complete.

Summary of Contents for SLIM02

















Reviews: