- 11 -
2. Turn On The Ice Maker
①.
Plug the ice maker, the electric power symbol < >
will start to flash, and the ambient temperature will
display at the top left corner of the screen window.
For example,
< >
digits means the 80 Fahrenheit
ambient.
②. Press the “ON/OFF” button to turn on the ice maker.
The water will flow into the water tank to the standard
water level, then the compressor start to make ice
cubes. The screen window will display as below:
Power symbol < > turns into always on state;
Ice-cube symbol < > turns into rotating state;
The ambient temperature display will disappear.
After some minutes of ice-making duration, the ambient
temperature displaying area will display flashing digit. For
example, the flashing digit < > means that it will take
10 minutes to complete this ice-making process.
③. When ice maker harvest, symbol
< >
flashes. After
the ice maker harvest, it will automatically goes into
the next ice-making process. The water will flow from
the water reservoir to water tank through solenoid
valve, and the symbol < > will be on. The symbol
< >
will be off if the water in the water tank is full,
then the next ice-making cycle start again.
Please Note:
• When there is no water in the water reservoir, the
symbol < > will keep on. Press “ON/OFF” button to
turn off the ice maker and fill water again, then press
“ON/OFF” button again to turn on to make ice cubes.
Or fill water directly and wait 20mins, the ice maker will
restart by itself.
• Each ice-making cycle lasts about 13 to 25 minutes which depends on
the ambient and water temperature. For the first time you use, it takes
more time to make ice cubes for the initial water temperature. In the
extremely hot room temperature, it takes more time but will be within 35
minutes to make ice cubes.
