12
EN
power source (e.g. PC, laptop or powerbank) for charging.
4. Plug the USB wall adapter into a mains socket for charging.
During charging, the charging indicator light
5
will become
red.
5. The charging indicator light will become blue when the
product is fully charged after about 3 to 4 hours. Unplug the
USB wall adapter from the mains socket and disconnect the
USB cable from the product.
6. Properly close the charging port cover.
6 Using the vanity mirror
• Press the touch On/Off / dimmer switch
1
to switch the LED
light ring
10
on or off.
• When the LED light ring is switched on, press and hold the
touch On/Off / dimmer switch to adjust the brightness (from
maximum to minimum brightness or vice versa) of the LED
light ring. Release the touch On/Off / dimmer switch when the
desired brightness is reached.
• When the LED light ring is switched on, press the touch light
mode switch
2
repeatedly to select a light mode (natural,
warm or bright).
• To use the magnifying mirror
11
(5× magnification), attach it
onto the centre of the vanity mirror
9
(see
Fig. B
).
The magnet at the centre position will hold the magnifying
mirror in place. The optimal distance to use the magnifying
mirror is within 10 cm.
7 Using the table lamp
1. Flip the vanity mirror
9
up until it is horizontally positioned.
The LED table lamp
3
on the bottom of the vanity mirror
will switch on (see
Fig. D
).
2. To switch off the LED table lamp, gently push the vanity mirror
downwards until the lamp is switched off.
8 Using the Bluetooth speaker
8.1 Bluetooth pairing
1. Press and hold the Bluetooth button
8
to switch on the
Bluetooth function (see
Fig. C
).