10
EN
7.3 Replacing the filter
The filter should be replaced regularly for optimal results. Always make sure that
the filter is in place to prevent particles such as dead skin cells or debris from
entering the motor.
1.
Gently remove the tip (
8
/
9
/
10
/
11
) and discard the filter
14
.
2.
Replace with a new filter and put the tip back into place.
7.4 Replacing the O-ring
The O-ring should only be replaced if it is damaged or worn. Always make sure
that the O-ring is in place, otherwise the device will not work properly.
1.
Gently remove the tip (
8
/
9
/
10
/
11
) and discard the O-ring
15
.
2.
Replace with a new O-ring and put the tip back into place.
8. Storage
U
All parts must be completely dry before being stored in the pouch
17.
You
can also use the charging cradle
7
as a stand to hold the device.
U
Do not wind the USB cable
13
round the device.
9. Troubleshooting
Some problems may be caused by minor faults that you can fix yourself. To do so,
follow the instructions in the following table. If it is still not possible to resolve the
problem, contact customer service. Do not repair the device yourself.
Fault
Possible cause and solution
The device won't
turn on.
Make sure the USB adapter is securely plugged in the
charging cradle, and plugged into a working mains socket
for at least one hour. The battery symbol on the LCD display
should indicate that device is charging. If the battery symbol
does not come on, contact our customer service.
Revit Prestige Canada 4390A ED343-02.indd 10
10/06/2018 14:00:38
