Silk'n JEWEL H3210, User Manual

Page: 23 / 340

21
EN
8. Troubleshooting
Do not attempt to open or repair your Silk'n device. You may
expose yourself to dangerous electrical components or pulsed
light energy and cause serious harm to yourself. It will also void
your warranty. For unresolved problems or queries, please
contact customer service.
Problem Checks
My device does not start. Make sure the adapter is properly
connected to the device and that it is
plugged into an electrical outlet on
the wall.
There is no light pulse
when the device touches
my skin.
Check that the device is connected
and the ready light
(#4)
is on. Make
sure that the treatment surface
(#6)
is
evenly and firmly pressed to the skin.
It is also possible that your skin colour
is too dark.
The skin colour sensor
light (#5) and the ready
light
(#4)
blink.
The skin colour is too dark.
One or more lights blink
continuously.
The device has malfunctioned.
The device has stopped
working and is in standby
mode.
Press the control button
(#3)
again to
start the device.