13
EN
1. Plug the smaller end of the USB cable
9
into the charging
port
8
.
2. Plug the larger end of the USB cable into the USB port of the
USB wall adapter
10
.
You may also plug the USB cable to a compatible USB power
source (e.g. USB port of a computer) for charging.
3. Plug the USB wall adapter into a mains socket for charging.
During charging, the LED light
3
will become red and start
to blink.
4. The LED light will become solid white when it is fully charged.
Unplug the USB wall adapter from the mains socket and
disconnect the USB cable from the facial brush.
6 Operation
• Clean the facial brush before first use as described in
the chapter “Cleaning”.
• Before cleansing an area of the face for the first time,
perform a skin sensitivity test on a spot. Start your
treatment only if there is no adverse reaction.
• The LED light
3
is solid white during operation and
flashes once whenever a button is pressed.
6.1 Using different areas of the facial brush
Area
Best for
Cleansing area
(thicker studs)
1
Precise cleansing and removal of dead skin
cells and horny layers.
Cleansing area
(thinner studs)
2
Gentle cleansing of large areas such as
cheeks.
Massaging area
(ridges)
4
Massaging the skin for improved blood
circulation and promoting the absorption of
skin care products.
6.2 Operation modes and speed settings
The facial brush is equipped with a vibrating and a pulsating mode.
• The vibrating mode uses uniform vibrations for deep, gentle
cleansing.
• The pulsating mode uses alternating strong and weak
vibrations for a massage-like soothing effect.
Summary of Contents for BRIGHT
Page 229: ...Doc Rev No 197894_20200131 ...
