SILKN AP-3WD, Instructions For Use Manual, Page: 14 / 168

14
EN
Troubleshooting
First try to solve the problem yourself by taking the measures listed below:
Problem Possible causes and remedy
The callus remover is not functioning. The batteries (9) may not have been inserted
properly.
• Take the batteries out and reinsert them,
checking for correct polarity.
The batteries (9) may be empty.
• Change the batteries for new ones.
The callus remover is running very slowly. The batteries (9) may be almost empty.
• Change the batteries for new ones.
One of the MicroPedi rollers is damaged. • Change damaged MicroPedi rollers for
original spare parts.
If these measures are unsuccessful or your callus remover needs to be repaired, contact
Customer Service via the details on the warranty card.
Technical data
Model: AP-3WD
Batteries: LR06/AA, 2×
Voltage: 3 V DC
Power consumption: 3.4 W
Speed: 2,300 rpm +/– 20%
Dimensions (H × W × D): approx. 15.5 × 6.0 × 3.5 cm
Weight without batteries: approx. 127 g
Storage temperature: 0−40 °C
Declaration of conformity
The EU declaration of conformity can be requested under the address shown on
the back.
Disposal
Disposing of the packaging
Sort the packaging materials before disposing of them, handing over cardboard for
the waste paper collection and plastics for recycling.