3. Quick Start
1. Install the ClockBuilderPro desktop software from
http://www.silabs.com/CBPro
.
2. Connect a USB cable from Si5395 EVB to the PC where the software was installed.
3. Leave the jumpers as installed from the factory, and launch the ClockBuilderPro software.
4. You can use ClockBuilderPro to create, download, and run a frequency plan on the Si5395 EVB.
5. For the Si5395 data sheet, go to
http://www.silabs.com/timing
.
UG335: Si5395 Evaluation Board User's Guide
Quick Start
silabs.com
| Building a more connected world.
Rev. 0.96 | 4
