Definition:
Number Function
1
A
（
Data+
）
2
B
（
Data-
）
3 -
4 -
5 -
6 -
7 GND
8 GND
3. Master controller reset key
Recovery factory set. Restore the factory set password when press this button more than 10 seconds.
4. Setting master controller transt frequency
Through the Code switch (RF Code) to set LED-WiFi controller wireless transmitting frequency. When the
near distance exists within several master controller, in order to make each subsystem not mutual interference,
can fine-tune master transmite frequency, realize the subsystem isolation. The same system transmite
frequency and receive frequency must be equal also is to dial the code of the same position, otherwise can't
achieve synchronous control.
5.
RF
transmit
antenna(433M).
6. Power input
Controller voltage range is DC5-24 V, more than working voltage may burn out controller.
7. ANT, WIFI signal reception.
V. Built-in mode form of controller
1.The mode form of RGB Control:
Mode number
function
remark
1 Static
red
2 Static
green
3 Static
blue
4 Static
yellow
5 Static
purple
6 Static
cyan
7 Static
white
Brightness is
adjustable,Speed is
unadjustable
