1. Master controller SSID setting
Through dial code
（
SSID
）
to set LED-WiFi controller SSID number,corresponding table as above. Form 0
to 15, have 16 code in total, the corresponding SSID are below.That means use our product in same small area
can set 16 mutual isolation LAN, once the dial code changed after switch was dialed, Ssid number immediately
be modified, so you need to note that it need to search and connect again.
2. Master signal output end
Master controller signal output. If user don't use wireless control or distance is farther, the interface is
synchronizing signal output.
code SSID
0 LN001
1 LN002
2 LN003
3 LN004
4 LN005
5 LN006
6 LN007
7 LN008
8 LN009
9 LN010
A LN011
B LN012
C LN013
D LN014
E LN015
F LN016
