Silicon Imaging SI-2K, User Manual

Page: 4 / 64

SI 2K Manual
Read all of these instructions carefully.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
Do not install near any heat sources as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plug,
convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with this apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury tip-over.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Do not leave in direct sunlight (or at least cover camera from heavy
sunlight i.e. with flags)
Only use camera in advised temperature range from 0 to +40° Celsius
/ °-104° Fahrenheit
Important Safety Instructions
4
SafetyInstructions