manualshive.com logo in svg

Silicon Imaging SI-2K, User Manual

Share
Download
Silicon Imaging SI-2K User Manual Download Page 22

  

 

QuickStartGuide

SI 2K Manual

viewfinder.

Secondary Monitoring:

The HDMI signal is used to show the secondary display which is a represen-
tation of the image recorded, it shows up without user interface and can be 
turned on and off inside SiliconDVR user interface. The HDMI Port at the SI-2K 
Recording Unit carries a DVI Signal (1280 x 720 @ 60Hz). By using off-the-
shelf HDMI to DVI Converters every kind of DVI Monitor can be fed.

There are manufacturers who provide solutions to convert the resulting DVI sig-
nal to HD or SD SDI video signal (i.e. Doremi DSDI-20 ). Please be aware that 
the SI-2K is rather designed as a Digital Cinema Camera than for purposes as 
a video camera. 

Notes on the HDMI Port:

If your DVI or HDMI monitor does not work instantly at the HDMI Port, please 
quit SiliconDVR application and manually restart it again. If it still does not work, 
the output device does not support given resolution and/or frequency. Please 
also note, that using the HDMI Port instead of splitting the VGA signal for moni-
toring slows down overall performance !

Audio

Audio input is provided on the 15-pin ‘D-sub’ connector at the top of the elec-
tronics  bay.  An  adapter  cable  terminates  in  two  XLR  connectors  for  stereo 
microphone inputs and two XLR connectors for stereo output. Note that these 
are not balanced inputs and should only be considered for scratch audio. Inter-
nal acquisition runs at 16 bit, 48 KHz per channel. 

For quality recording, the M-Audio MobilePre external audio interface has been 
tested  and  is  compatible  with  the  SI-2K.  Other  audio  devices  are  not  sup-
ported by the camera and SiliconDVR. 

A 1/8” stereo headphone jack for sound monitoring is provided to the right of 
the microphone connector.

Summary of Contents for SI-2K

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands