manualshive.com logo in svg

Silicon Graphics Rackable C2005 Family, User Manual, Page: 42 / 42

Share
Download
Silicon Graphics Rackable C2005 Family User Manual Download Page 42

32

007-5717-002

A: Technical Specifications

Table A-2

 lists physical, thermal, power, and compliance specifications for C2005 servers. The 

numbers reflect a typical configuration with four hot-swap drives.

Table A-2

Physical, Thermal, Power, and Compliance Specifications

Attribute

Specification

Form

2U rack mount / half-depth (14.5")

Dimensions

3.5" x 17.6" x 15.5" (HxWxD)

Gross weight 

~27lbs.

Max. thermal sustained 
output

1121BTU/hr (AC) and 839BTU/hr (DC) 
(approximate, based on a typical configuration)

Actual max. power number

346W (AC) and 256W (DC)
(approximate, based on a typical configuration)

Power supply

Input: 100–240VAC (standard), 

–

48VDC (optional)

250W or 450W with +3.3V, +5V, +12V, –5V, and –12V main DC 
outputs and a 5V standby

Compliance

US (FCC, CFR47 Part 15, Class )
Canada (ICES Class A)
Europe (CE, EN55022 & EN55024) 
Australia (C-TICK) 
Japan (VCCI) 

Summary of Contents for Rackable C2005 Family











































Reviews:

No comments