manualshive.com logo in svg

Silicon Graphics Rackable C1104G-RP5, User Manual

Share
Download
Silicon Graphics Rackable C1104G-RP5 User Manual Download Page 7

: 

007-5839-001

vii

Related Publications

The following SGI and LSI documents may be relevant to the use of your server:

•

MegaRAID SAS Software User’s Guide

, publication number, 860-0488-00

x

•

SGI Performance Suite 

series documentation

•

SGI InfiniteStorage

 series documentation

•

Man pages (online) 

You can obtain SGI documentation (as well as the pertinent LSI books), release notes, or man 
pages in the following ways:

•

Refer to the SGI Technical Publications Library at http://docs.sgi.com. Various formats are 
available. This library contains the most recent and most comprehensive set of online books, 
release notes, man pages, and other information.

•

You can also view man pages by typing

 man

 <

title

> on a command line. 

SGI systems include a set of Linux

®

 man pages, formatted in the standard UNIX

®

 “man page” 

style. Important system configuration files and commands are documented on man pages. These 
are found online on the internal system disk (or DVD-CD) and are displayed using the 

man

 

command. For additional information about displaying man pages using the 

man

 command, see 

man(1)

.

In addition, the 

apropos

 command locates man pages based on keywords. For example, to 

display a list of man pages that describe disks, type the following on a command line:

apropos disk

For information about setting up and using 

apropos

, see 

apropos(1).

Summary of Contents for Rackable C1104G-RP5













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands