Silicon Graphics IRIS Workstation, User Manual

Page: 8 / 170

4 IRIS WORKSTATION GUIDE
Version 1.0
Unpacking the IRIS Workstation Components
Category IRIS 1400
Temperature 50 — 86F° (operating)
40 — 176F° (non-operating)
Relative humidity 40 — 80%
Minimum clearance 3” all sides
Monitor desk space 36” width
30” length
Cabinet floor space 24” width
33” length
29” height
Power 115 volts
15 amps
60 hertz
single phase
two wires + ground
Power consumption 883 watts
1240 KVA
Heat dissipation 3012 BTU/hour
Card slots 20
Table 2-1: IRIS Workstation Environmental Specifications
9. Compare the equipment included in the tray with the list in Section
3. If any parts appear to be missing, contact Silicon Graphics
Customer Service (see Section 1).
10. Cut the plastic straps on the white carton.
11. Open the top of the carton and remove the foam cap.
12. Lift the carton off of the Cabinet.
13. Lift the Cabinet off the base pallet and set it on the floor.
14. Remove the foam spacers.
15. The Cabinet is shipped inside a large plastic bag. Remove the
Cabinet from the bag.
16. Check for damage to the Cabinet.
17. Remove the front panel from the Cabinet and check that the boards
inside are firmly attached.
18. The Cabinet has four castors on its base that allow it to be rolled
across a surface. Roll it to the location where it will be used.