Silicon Graphics IRIS Workstation, User Manual

Page: 64 / 170

60 IRIS WORKSTATION GUIDE
Version 1.0
Appendix B:
inode. This is only a warning. See Section 4.2.5.
DIRECTORY MISALIGNED I=I
The size of a directory inode is not a multiple of the size of a directory entry
(usually 16). This is only a warning. See Section 4.2.5.
PARTIALLY ALLOCATED INODE I=I (CLEAR)
Inode I is neither allocated nor unallocated. See Section 4.2.1.
Possible responses to the CLEAR prompt are:
YES de-allocate inode I by zeroing its contents.
NO ignore this error condition.
Phase 1B: Rescan for More DUPS
When a duplicate block is found in the file system, the file system is rescanned
to find the inode which previously claimed that block. This section lists the
error condition when the duplicate block is found.
B DUP I=I
Inode I contains block number B which is already claimed by another inode.
This error condition will always invoke the BAD/DUP error condition in Phase
2. You can determine which inodes have overlapping blocks by examining this
error condition and the DUP error condition in Phase 1. See Section 4.2.3.
Phase 2: Check Pathnames
This phase concerns itself with removing directory entries pointing to error
conditioned inodes from Phase 1 and Phase 1b. This section lists error
conditions resulting from root inode mode and status, directory inode pointers
in range, and directory entries pointing to bad inodes.
ROOT INODE UNALLOCATED. TERMINATING.
The root inode (usually inode number 2) has no allocate mode bits. This
should never happen. The program will terminate. See Section 4.2.1.
ROOT INODE NOT DIRECTORY (FIX)