Silicon Graphics InfiniteStorage 6120, User Manual

Page: 73 / 94

Status LED Indicators
0 0 7 - 5 5 3 3 - 0 0 1
63
4.1.3 Controller
Figure 88 describes the controller LED
(Figure 87)
status.
• Under normal conditions, the LEDs should be illuminated constant green.
• If a problem is detected, the color of the relevant LED will change to amber.
4.1.4 HDD (Hard Disk Drive)
Figure 89 describes the fault LED status when an HDD has failed.
• Under normal conditions, the LEDs should be illuminated constant green.
• If a problem is detected, the color of the relevant LED will change to amber.
Figure 88. Controller LED Indicators
Identifier Location Color Status
Enclosure fault Front enclosure Amber ON - IO fault detected
Firmware status Rear enclosure Green
ON - InfiniteStorage 6120 is ready to be accessed
Blinks - firmware is loading
OFF - InfiniteStorage 6120 is NOT ready to be
accessed
Power Rear enclosure Green
ON - power is applied to controller
OFF - power is NOT applied to controller
Identify Rear enclosure Blue
ON - SES identify command is received
OFF - SES identify command is NOT received
Figure 87. LEDs on Controller
EXPANSION
CLI
LINK SPEED
PO
R
T
2
POR
T
1
Firmware Status LED
Power LED
Identify LED
RESE
Figure 89. HDD LED Indicators
Identifier Location Color Status
Enclosure fault Enclosure front Amber ON - drive fault
Drive fault Enclosure front Amber ON - drive fault