1-4
10
Adjusting the size of the picture
(SIZE/CENTER)
This setting is stored in memory for the current input signal.
1 Press the
button.
The main MENU appears on the screen.
2 Press the
m
/
M
buttons to highlight
SIZE/CENTER
and press the
button again.
The SIZE/CENTER menu appears on the screen.
3 First press the
m
/
M
buttons to select
for
horizontal adjustment, or
for vertical adjustment.
Then press the
<
/
,
buttons to adjust the size.
Adjusting the centering of the
picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1 Press the
button.
The main MENU appears on the screen.
2 Press the
m
/
M
buttons to highlight
SIZE/CENTER
and press the
button again.
The SIZE/CENTER menu appears on the screen.
3 First press the
m
/
M
buttons to select
for
horizontal adjustment, or
for vertical adjustment.
Then press the
<
/
,
buttons to adjust the
centering.
Enlarging or reducing the picture
(ZOOM)
This setting is stored in memory for the current input signal.
1 Press the
button.
The main MENU appears on the screen.
2 Press the
m
/
M
buttons to highlight
SIZE/
CENTER and press the
button again.
The SIZE/CENTER menu appears on the screen.
3 Press the
m
/
M
buttons to select
(zoom), and
press the
<
/
,
buttons to enlarge or reduce the
picture.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
Adjusting the shape of the picture
(GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and
shape of the picture.
The
(rotation) setting is stored in memory for all input signals.
All other settings are stored in memory for the current input
signal.
1 Press the
button.
The main MENU appears on the screen.
2 Press the
m
/
M
buttons to highlight
GEOMETRY
and press the
button again.
The GEOMETRY menu appears on the screen.
3 First press the
m
/
M
buttons to select the desired
adjustment item. Then press the
<
/
,
buttons to
make the adjustment.
Select
To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the
screen
11
GB
‡
Adjusting the convergence
(CONVERGENCE)
The CONVERGENCE settings allow you to adjust the quality of
the picture by controlling the convergence. The convergence
refers to the alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the
convergence.
These settings are stored in memory for all input signals.
1
Press the
button.
The main MENU appears on the screen.
2
Press the
m
/
M
buttons to highlight
CONVERGENCE and press the
button again.
The CONVERGENCE menu appears on the screen.
3
First press the
m
/
M
buttons to select the desired
adjustment item. Then press the
<
/
,
buttons to
make the adjustment.
Adjusting the quality of the picture
(SCREEN)
The SCREEN settings allow you to adjust the quality of the
picture by controlling the moire and landing.
• If the color is irregular at the corners of the screen, adjust the
landing.
• If elliptical or wavy patterns appear on the screen, cancel the
moire.
The CANCEL MOIRE and MOIRE ADJUST settings are stored
in memory for the current input signal. All other settings are
stored in memory for all input signals.
1
Press the
button.
The main MENU appears on the screen.
2
Press the
m
/
M
buttons to highlight
SCREEN and
press the
button again.
The SCREEN menu appears on the screen.
3
First press the
m
/
M
buttons to select the desired
adjustment item. Then press the
<
/
,
buttons to
make the adjustment.
• Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Note
The picture may become fuzzy when CANCEL MOIRE is set to ON.
Select
To
horizontally shift red or blue
shadows. These adjustments effect
the entire screen.
vertically shift red or blue shadows.
These adjustments effect the entire
screen.
TOP
V CONVER TOP
vertically shift red or blue shadows at
the top of the screen
BOT
V CONVER
BOTTOM
vertically shift red or blue shadows at
the bottom of the screen
Select
To
LANDING
reduce any color irregularities in the
screen’s top left corner to a minimum.
LANDING
reduce any color irregularities in the
screen’s top right corner to a
minimum.
LANDING
reduce any color irregularities in the
screen’s bottom left corner to a
minimum.
LANDING
reduce any color irregularities in the
screen’s bottom right corner to a
minimum.
CANCEL MOIRE*
turn the moire cancellation function
ON or OFF.
(MOIRE ADJUST) appears in
the menu when you select ON.
MOIRE ADJUST
adjust the degree of moire
cancellation until the moire is at a
minimum.
Example of moire
