__________________________________________________________________
and
programing
your
Nucleo-L152RE.
Below there is the content of
main.cpp
#include "mbed.h"
//------------------------------------
// Hyperterminal configuration
// 9600 bauds, 8-bit data, no parity
//------------------------------------
Serial pc(SERIAL_TX, SERIAL_RX);
DigitalOut myled(LED1);
int main() {
int i = 1;
pc.printf("Hello World !\n");
while(1) {
wait(1);
pc.printf("This program runs since %d seconds.\n", i++);
myled = !myled;
}
}
Configure your
Windows 7
) using the following parameters:
__________________________________________________________________
