11
Trouble Shooting
Problem
Possible
Cause
What to do
No Power
A fuse in your home may
Replace fuse or reset circuit breaker.
be
blown or the circuit
Plug not fully inserted into wall
outlet
Door(s) not shut properly
Ensure that the doors are fully closed
only as needed and for short periods
Exhaust vent is obstructed
Verify there is nothing blocking the
Recently
added
a
large
Limit the quantity of warm items
Condensation on the
High humidity conditions
The condensation will subside once
Door(s) not shut properly
Ensure that the doors are fully closed
against the cabinets. Open the doors
only as needed and for short periods
breaker
tripped
Power surge
too
High
or
opened excessively
and that the gaskets are sealing
against the cabinet. Open the doors
the
cabinet
of time
cabinet and/or doors
in the home
humidity conditions return to normal
quantity
of
warm
bottles to
being introduced to the cabinet.
front mounted exhausting vent
of time
Adjust if neccessary
Cabinet
Temperature
Temperature
Verify the temperature control setting
or opened excessively
and that the gaskets are sealing
Alarm Beeping and “HI”
is displayed on the
control panel
not as set
Recently added a large
to the cabinet
quantity of warm bottles
Limit the quantity
warm items
being introduced to the cabinet.
of
The door is not closed tightly
Be sure the door is closed tightly
System leak, evaporator fan
failure, compressor fan failure
Contact service center.
To stop beeping, unplug the unit
Alarm Beeping and “LO”
is displayed on the
control panel
Sensor Failure, evaporator
temperature is too low
Contact service center.
To stop beeping, unplug the unit
Unplug the wine cooler, wait a few
seconds and then plug it back in
Make sure the 3-prong plug on the
wine cooler is fully inserted into the
outlet
Occasionally, a problem is minor and a service call may not be necessary - use this trouble shooting
guide for a possible solution. If the unit continues to operate improperly, call an authorized service
depot or toll free at
1-844-455-6097
