10
6.4 MODULE 4 - S
ETPOINT
O
UTPUT
P
ARAMETERS
(
4-SEtPt
)
PARAMETER MENU
The Setpoint Output Parameter is only active when the optional relay
module is installed in the meter.
Select the display the Setpoint is to be assigned.
SETPOINT OUTPUT ACTION
SETPOINT ASSIGNMENT
The
yES
selection allows the
SEL
button to toggle through the enabled
displays.
FRONT PANEL DISPLAY SELECT ENABLE (SEL)
6.3 MODULE 3 - D
ISPLAY AND
F
RONT
P
ANEL
K
EY
P
ARAMETERS
(
3-dSPLAY
)
PARAMETER MENU
The
yES
selection allows the
RST
button to reset the selected counter(s). The
shaded selections are only active when the meter is programmed for Dual
Count Mode.
FRONT PANEL COUNTER RESET ENABLE (RST)
The
yES
selection allows the display to automatically scroll through the
enabled displays. The scroll rate is about every 4 seconds.
DISPLAY SCROLL ENABLE
Enter the desired backlight color, red or green. This parameter is active for
backlight units only.
DISPLAY COLOR (BACKLIGHT UNIT ONLY)
Enter the desired Display Intensity Level (1-5). The display will actively dim
or brighten as levels are changed. This parameter is active for backlight units only.
DISPLAY INTENSITY LEVEL (BACKLIGHT UNIT ONLY)
Programming a value other than 000, requires the security code to be entered
before any programming changes can be made. This parameter can be
used in conjunction with the Program Mode Lock-out in the Input Setup
Parameters section.
PROGRAMMING SECURITY CODE
The
yES
selection will return the meter to the factory default settings. The
meter will display
rESEt
and then return to
Pro
, at which time all settings have
been changed.
Pressing the
RST
key on power-up will load the factory settings and display
rESEt
. This allows operation in the event of a memory failure or corrupted data.
LOAD FACTORY DEFAULT SETTINGS
This parameter selects the action of the Setpoint output.
rAtE
Count A
LAtCH
t-OUt
bOUNd
NO
yES
Count b
both A-b
dSPLAy
yES
NO
NO
Count A
NO
yES
6rn
rEd
0
to
999
yES
NO
yES
SEL Enb
YES
RSt Enb
NO
d-ScroLL
rEd
d-COLOr
5
d-LEVEL
000
Pro CodE
MO
FACt SEt
Count A
SPt ASN
LAtCH
SPt ACt
1
to
5
