Silex technology SX-550, Developer'S Reference Manual

Page: 39 / 123

SET PORT S1 FLOW <flowcontrol> [where <flowcontrol> is NONE, XON/XOFF,
CTS, or DSR]
The console commands are summarized in Appendix B of this manual.
6. When you have finished entering commands type:
INIT
EXIT
These commands will save the configuration and restart the unit. You are now ready to use the
SX-550.
EXIT
7. After an IP address is configured in the SX-550, you can also access the Internal Command
Console in any of the following ways:
•
TELNET . From the Windows Command Prompt (MS-DOS Prompt), Mac OS X Terminal
Utility, or UNIX/Linux command line, enter the command:
telnet aa.bb.cc.dd
where aa.bb.cc.dd is the IP address of the SX-550. Press <ENTER> and then enter the
password access at the # prompt. Press <ENTER> at the Enter Username> prompt and
you are now ready to enter console commands.
•
Internal Web Pages. Use a web browser to connect to the SX-550 internal web pages as
described earlier in this chapter. After you have logged in, click Admin on the left side of
the screen, and then click Console . You can now enter console commands (you must
click Enter after each command).
•
ExtendView. Select the desired SX-550 from the ExtendView main menu. Click Tools
on the menu bar, and then click Telnet Session . Press <ENTER> and then enter the
password access at the # prompt. Press <ENTER> at the Enter Username> prompt and
you are now ready to enter console commands.
Part Number 40183-101 Silex SX-550 Developer's Guide Page 31
IMPORTANT: The console command EXIT must always be used in order to save the changes you made with the
internal command Console.