Silex technology SX-550, Developer'S Reference Manual

Page: 101 / 123

Command Description
FRS If the index is zero, the default string of <CRLF> (carriage return-line feed) is
used.
The default value is 0.
Format:
SET SERVI <service name> FRS nn
SET SERVI <service name>
IP Enables or disables IP based jobs such as lpd, raw tcp and ftp, on the service
The default value is enabled for service 1 and 2, disabled for all others.
Format:
SET SERVI <service name> IP [ENable | DIsable]
SET SERVI <service name>
NAme Changes service name
The default value varies by service
Format:
SET SERVI <service name> NAme <newname>
SET SERVI <service name>
POrt Sets output port associated with a service
The default value is S1.
Format:
SET SERVI <service name> POrt <portname>
SET SERVI <service name>
PRIority Sets priority for service for multiple service transmissions simultaneously
The default value is 10.
Format:
SET SERVI <service name> PRIority nn
SH SERVI PRI
[
service_num ]
Shows priority of service.
If service_num is not provided, the priority of all services is listed.
SET SERVI <service name>
RECeive Sets receive only mode for a service
This option is required only for host applications that do not operate properly if
data is received from the serial device.
The default value is disabled.
Sample output:
SET SERVI <service name> RECeive [ENable |
DIsable]
SET SERVI <service name>
TCP Sets raw TCP port for service
If port number is 0, raw TCP is disabled on service.
The default value is 9100 for service 1, 3001 for service 2.
Format:
SET SERVI <service name> TCP nn
SH SERVI SUMmary
[
service_num ]
Shows the basic parameters for a specific service. If service_ num is not
provided, parameters for all services are displayed.
The command SH SERVI displays the same data as SHOW SERVI SUM.
Part Number 40183-101 Silex SX-550 Developer's Guide Page 93