2-19
About PRICOM
Users Manual CX
Connection to the Network
-If you have already used PRICOM C-6200U on another network, initialize PRICOM
C-6200U to factory default. You can initialize PRICOM C-6200U from PRICOM User
Software CX. For further information, refer to Chapter 3 of this on-line manual.
-PRICOM C-6200U can not be used with USB HUB.
-If you are using PRICOM C-6200U in a 100BASE-TX environment, prepare 100BASE
Ethernet HUB and network cable (Category 5).
To connect PRICOM C-6200U to the network, printer or complex machine, follow the
steps below.
1. Connect PRICOM C-6200U and the
Ethernet hub between the network
cable.
2. Connect the AC adapter to PRICOM
C-6200U and plug the power of the
printer or complex machine cord in
the outlet.
Ethernet HUB
Network Cable
USB Cable
TIP
Hardware Installation
