background image

1-2

Introduction

Users Manual CX

About this Manual

This manual uses the following symbols to point out specific information.
The information after the symbols should always be well observed.

This symbol indicates important information that needs to be observed when operating the

product. Make sure to read this information for safe and proper use.

This symbol indicates useful information that is helpful when operating the product. When

you experience difficulties operating the product, please refer to this information first.

NOTE

TIP

-Copying of all or part of this manual without our permission is forbidden.
-The contents of this manual may be changed without advance notice.
-If you have any question about this manual or our products, please contact our
 customer support.
-This manual has been edited very carefully. However, silex technology, Inc. is not
 responsible for any mistakes included in this manual or any damages, direct or indirect,
 arising from the use of this manual.

Copyright © 2002 silex technology, Inc.

-Canon is a registered trademark of Canon Inc., Bubble Jet is a trademark of Canon Inc.
-Microsoft, Windows, Windows NT etc. are registered trademarks of Microsoft Corporation in the U.S. and
 other countries.
-Other brand or product names are registered trademarks or trademarks of their respective companies.

Summary of Contents for PRICOM PRICOM C- 5100








Reviews: