manualshive.com logo in svg

Silex technology BR-300AN, User Manual

Share
Download
Silex technology BR-300AN User Manual Download Page 111

A. Appendix

105

Advanced Configuration - Address Management Table Configuration
Address Management Table Configuration

Details

Enable/Disable the address management table feature to use in 

Multi-Client 

Mode

 (

ON

/

OFF

). 

When 

ON

 is set, combination information of MAC address and IP address will be 

used from management tables (IPv4/IPv6) for connected non-wireless devices.

Range

OFF / ON

Default Value

OFF

Note

This function can be used when 

Multi-Client Mode

 is set for Client Mode.

When the address management table feature is 

ON

, combination information 

of MAC address and IP address will be used from management tables for 
connected non-wireless devices. When a new address is found by BR-300AN, it 
will automatically be registered to the management table.
When the address management table feature is 

OFF

, the management table 

setting is not used. Combination information of MAC address and IP address is 
created dynamically and such information will automatically be deleted when 
it is not accessed for 5 mins.

Management Table (IPv4)

Details

Register combination of MAC address and IP address (IPv4).

Range

Up to 16 sets of MAC address and IP address (IPv4)

Default Value

(None)

Management Table (IPv6)

Details

Register combination of MAC address and IP address (IPv6).

Range

Up to 16 sets of MAC address and IP address (IPv6)

Default Value

(None)

Summary of Contents for BR-300AN





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands