![Silex technology BR-300AN User Manual Download Page 103](http://html.mh-extra.com/html/silex-technology/br-300an/br-300an_user-manual_1271345103.webp)
A. Appendix
97
Wireless LAN Configuration - WEP Configuration
WEP
Details
Enable/Disable the WEP encryption.
If WEP encryption is used, wireless communication will be encrypted using the
settings for "
WEP Key 1-4
" and "
Key Index
".
Range
ON/OFF
Default Value
OFF
Note
If encryption is not enabled, data is not encrypted and is sent as is. To ensure
higher security, enabling encryption is recommended.
Key Index
Details
Select the number of the WEP key to use for encryption (1-4).
This setting must be the same as that of your wireless device.
Range
1 - 4
Default Value
1
WEP Key1-4
Details
Set the WEP key for WEP encryption.
Up to 4 WEP keys can be set. This setting must be the same as that of
your wireless devices. A WEP key must be entered using hexadecimal or
alphanumeric characters.
Range
5 or 13 characters
10 or 26 digit hexadecimal value
Default Value
(None)
Note
In most cases, alphanumeric characters are used.
Enter 5 characters if the key size is 64bit or 13 characters if the key size is 128bit.
For Hexadecimal, a value consists of numbers (0-9) and English letters (A-F).
Enter a 10-digit value if the key size is 64bit or a 26-digit value if the key size is
128bit.
Usable characters will differ depending on the AP to connect.