5
3.2 FCC Warning
WARNING:
This equipment generates and uses radio frequency energy. If not installed and used in strict accordance
with this manual, it may cause harmful interference to radio communications. It has been tested and
found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC
Rules, which are designed to provide reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to cause
interference. If this occurs, the user will be required, at his or her own expense, to take whatever
measures may be required to correct the interference.
3.3 UL Listings and Requirements
Model
Listed As:
NFPA 72 Chapter
(for more information):
5128
Signaling device subassembly for use in Central
Station Fire-Protective Signaling Systems.
4-3
Remote Signaling Service.
4-5
5129
Signaling device for use in Central Station Fire-
Protective Signaling Systems.
4-3
Remote Signaling Service.
4-5
All UL installations must comply with the requirements described below. Refer to the control unit’s
installation manual for complete information.
5128 Requirements:
The 5128 must be mounted within a UL listed compatible fire control panel.
5129 Requirements:
The 5129 and the UL listed compatible fire control must be installed in the same room. All wiring between the
5129 and the UL Listed compatible fire control panel must be enclosed in conduit.
Requirements for both 5128 and 5129:
All electrical connections must comply with the ratings shown in section 4.4.2.
In a remote signaling installation, the control unit, slave dialer, and receiver at the remote site must all be UL
listed for remote signaling.
