9
The Silent Guitar ships from the factory with its detachable frame removed. Please follow
the instructions below to properly attach the detachable frame to the body.
1.
Loosen Frame Fixing Screw 1 located at the
heel of the neck and Frame Fixing Screw 2
located at the base of the instrument.
2.
First, insert the Frame Pin (Lower) about half-
way into the fixing hole on the guitar.
3.
Next, insert the Frame Pin (Upper) into the
fixing hole making sure that both the upper
and lower pins on the detachable frame are
inserted evenly and fully into the holes.
* Do not mistake the upper and lower sections of the
frame when attaching.
* When attaching or removing the frame, do not
apply pressure that may result in bending the pins.
Doing so may damage the fixing pins.
4.
After verifying that both upper and lower fixing
pins are fully inserted, turn the fixing screws
clockwise to secure the frame to the guitar
body.
CAUTION
When moving any movable parts, make sure that
your fingers or hand do not become pinched in
the parts.
Attaching the Frame
n
About the Strap Pins
The frame fixing screws also function as strap pins for attaching a guitar strap (sold separately) to the
instrument.
* Make sure that the guitar strap is securely attached to the instrument to prevent it from falling when playing.
Frame Fixing Screw 1
Frame Fixing Screw 2
4
2
4
3
Frame Pin (Upper)
Frame Pin (Lower)
Detachable
Frame
This completes the frame attachment procedure.
To remove the frame, loosen Frame Fixing Screws 1 and 2 then pull the upper and lower frame sec-
tions away from the body slowly and evenly.
* Make sure Frame Fixing Screws 1 and 2 are fastened securely after attaching the frame. Loose screws can result
in the frame rattling, which may cause noise while playing.
* Always hold the instrument by its body or neck when moving the instrument. Holding the instrument by its frame
can damage the frame and/or its fasteners.
