SDE04
Transport, Storage, Maintenance and Disposal English
SDE04 · Date
23.01.2015 · Art.
No.
85090 · Mod.
status
025/15
24
6.4 Trouble shooting after battery change
Error:
Loss of position value following battery change.
Reason:
Battery change.
Action:
Re-calibration required (see chapter
Error:
No display in spite of new battery.
Reason:
The battery compartment was not pushed in completely. Battery
inserted the wrong way. Plus sign must be directed downwards.
Action:
Correct polarity and position.
7 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store wire-actuated position indicator with care.
Pay attention to the following points:
•
Transport and / or store wire-actuated position indicators in the
unopened original packaging.
•
Protect wire-actuated position indicators from harmful physical influ-
ences including dust, heat and humidity.
•
Prior to installation inspect the wire-actuated position indicator for
transport damages. Do not install damaged actuators.
Maintenance
With correct installation according to chapter
the wire-actuated posi-
tion indicator requires no maintenance except for battery change accord-
from time to time. The wire-actuated position indicator
has received lifetime lubrication and need not be lubricated under normal
operating conditions.
Disposal
The wire-actuated position indicator's electronic components contain
materials that are harmful to the environment and are carriers of recycla-
ble materials at the same time. Therefore, the wire-actuated position indi-
cator must be recycled after it has been taken out of operation ultimately.
Observe the environment protection guidelines of your country.
Battery: Do no throw batteries in the normal waste, into fire or water. Col-
lect batteries and dispose of them in an environmentally friendly way.
Only for EU countries: Defective or used batteries must be recycled accord-
ing to Directive 91/157/EEC.
Summary of Contents for SDE04
Page 26: ...SDE04 26...
Page 27: ...SDE04 27...