AH36M
Technical data English
AH36M · Date
05.03.2018 · Art.
No.
85966 · Mod.
status
1/18
21
Advice
`
Strand cross-section of screened lines 0.14 ... 0.5 mm² / cable feed-
through: ø4 ... ø8 mm.
•
Accessory SIKO art. no. "83006" M12 A coded (socket contact 5 pin).
Mounting (
Fig. 2
)
1. Slide the pressure nut and housing along the cable.
2. Strip the cable, shorten the screen.
3. Strip wires and connect.
4. Screw housing with insert.
5. Tighten pressure nut.
Fig. 2: Right anlge mating connector M12
8
31
12
Changing the angle position (
Fig. 2
)
1. Turn on insert, slightly pull out and rotate to desired angular position
(in steps of 45°).
2. Screw on insert.
8 Technical data
Mechanical data
Additional information
Shaft
stainless steel
Flange
aluminum
Housing
coated steel
Speed
≤12000 min
-1
Moment of inertia
≤20 gcm
2
Starting torque
≤20 Ncm
at 25 °C
Shaft load rating
axial 20 N
radial 80 N
NOTICE