SIKA VTY10K5, Operating Manual

Page: 18 / 28

Installation VTY
- 18 - © SIKA • Ea7900_VTY • 05/2022
IMPORTANT NOTICES
• Only use suitable gaskets during mounting.
• Observe the flow direction indicated on the device.
• Observe the mounting dimensions (

p. 24).

Select an appropriate location for installation (

p. 16).
To ensure the best possible measuring accuracy, a verti-
cal installation position with increasing flow is preferable
(no collecting of dirt deposits).

Install the appropriate screwed connections at the installa-
tion location.

Insert the flow sensor together with the gaskets.
Pay attention to the correct position of the gaskets!

Screw the union nuts of the screwed connection onto the
process connections of the flow sensor.
PAY ATTENTION TO MAXIMUM
TORQUE
While tightening, counter the union nut on the tur-
bine body of the process connection!
If you do not counter it, the flow sensor can be
damaged.
Maximum torque / Width across flats
VTY10MA
• G½
VTY10K5 •
G¾
VTY15 •
G¾
VTY20 •
G1
VTY25 •
G1¼
20 Nm 8 Nm 20 Nm 20 Nm 20 Nm
AF19 AF19 AF24 AF30 AF36

Tighten both union nuts.
When tightening, use a spanner to counter the process
connection on the turbine body in place.