— Series VMI
Safety instructions
Technical changes reserved
- 25 -
Qualified personnel
•
The personnel who are charged for the installation, operation and maintenance of the
VMI must hold a relevant qualification. This can be based on training or relevant tuition.
The personnel must be aware of this operating manual and have access to it at all times.
•
The electrical connection should only be carried out by a fully qualified electrician.
General safety instructions
•
In all work, the existing national regulations for accident prevention and safety in the
workplace must be complied with. Any internal regulations of the operator must also be
complied with, even if these are not mentioned in this manual.
•
Degree of protection according to EN 60529:
Please ensure that the ambient conditions at the site of use does not exceed the require-
ments for the stated protection rating (
•
Prevent freezing of the medium in the device with appropriate measures.
•
Only use the VMI if it is in perfect condition. Damaged or faulty devices must be checked
without delay and, if necessary, replaced.
•
When fitting, connecting and removing the VMI use only suitable appropriate tools.
•
Do not remove or obliterate type plates or other markings on the device, as otherwise the
warranty is rendered null and void.
