5
Existing 32-bit Windows XP/Server 2003 Installation
1.
Install the board and boot up Windows.
2.
At the
Found New Hardware Wizard
.
XP (w/SP1 or earlier)/Server 2003
: continue to step #3.
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later)
: select
No, not this time
, then click
Next
.
Note:
Most systems will install the driver
automatically after inserting driver CD.
3.
Insert driver CD, select
Install the software
automatically (Recommended)
, then click
Next
.
4.
Click
Next
, then click
Finish.
5.
Restart Windows to complete the driver installation.
64-bit Windows XP/Server 2003
New 64-bit Windows XP/Server 2003 Installation
A new installation of Windows XP/Server 2003 requires
a floppy disk for the driver installation. To make this
floppy disk, copy the contents of the
64bit
folder, found
on the driver CD, onto a blank floppy disk then follow the
directions below.
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2.
Restart your system when prompted during
Windows' installation.
3.
At the
Windows Setup
screen, press
F6
to continue.
4.
Insert the driver
diskette. Press
S
then press
Enter
.
5.
Select
Silicon Image SiI 3132... Controller (64-bit
Extended)
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen
instructions to complete the installation.
