4
6.
Press
Enter
to continue and follow on-screen
instructions to complete the installation.
Existing Windows 2000 Installation
1.
Install the board and boot up Windows 2000.
2.
At the
Found New Hardware Wizard
, click
Next
.
3.
Select
Search for a suitable driver for my device
(recommended)
and click
Next
.
4.
Insert the driver CD, check
CD-ROM drives
, uncheck
the other boxes, and click
Next
. Click
Next
again to
continue.
5.
Click
Finish
and restart Windows to complete the
driver installation.
32-bit Windows XP/Server 2003
New 32-bit Windows XP/Server 2003 Installation
A new installation of Windows XP/Server 2003 requires
a floppy disk for the driver installation. To make this
floppy disk, copy the
contents
of the
Floppy
folder,
found on the driver CD, onto a blank floppy disk then
follow the directions below.
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2.
Restart your system when prompted by Windows'
installation.
3.
At the
Windows Setup
screen, press
F6
to install the
driver.
4.
Insert the driver
diskette. Press
S
then press
Enter
.
5.
Select
Silicon Image Sil 3132... Controller for
Windows XP and Server 2003
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen
instructions to complete Windows installation.
