2
Package Contents
•
IDE to SATA HDD Adapter
•
Quick Installation Guide
Board Layout
SATA connector
Power
connector
IDE cable connector
Figure 1: Layout
•
Power connector
: plug in a power connector from
the system power supply here
•
SATA connector
: plugs directly into a SATA hard
disk drive
•
IDE cable connector
: plug in your IDE cable here,
make sure the stripe on the cable is oriented to
Pin 1
of the connector. Plug the other end of the IDE
cable into the IDE controller of your computer. Up
to two IDE devices can be connected onto one IDE
cable, in this case, one device must be jumpered
Master
and the other jumpered
Slave
, when
connecting only one device it must be jumpered
Master
•
Device select jumper
: the default setting of the
IDE
to SATA HDD Adapter
is
Slave
(jumper on - Device
1), remove the jumper to set as
Master
(jumper off -
Device 0)
Device select jumper
Pin 1
Summary of Contents for SC-SA0512-S1
Page 5: ...5 Blank Page ...
Page 6: ...6 Blank Page ...
