4
5
Operations
The PC Switch 6000 comes with the following LEDs for user’s
friendly operation:
POWER LED:
To indicate the PC Switch 6000 is powered on
and ready.
SCAN LED:
To indicate the PC Switch 6000 is under the
SCAN mode.
READY LED:
To indicate the corresponding PC is powered
on.
ACTIVE LED:
To indicate the current selected operating PC.
To Access the PC
You can access to the connected PCs by pressing the SELECT
button on the front panel of the PC Switch 6000, or the HOT keys
on the console keyboard.
Press the SELECT button:
Press the SELECT button and release it within one second.
The ACTIVE LED will advance to the next corresponding
PC’s LED with a beep sound.
Press the HOT keys:
Press and release the HOT keys (Ctrl, Alt and Shift) on the
console keyboard simultaneously. Followed by entering a
corresponding PC’s number (#) and press Enter.
For example: Ctrl + Alt + Shift
è
a number
è
Enter
To Activate the SCAN Mode
You can monitor the PCs by pressing the SELECT button, or the
HOT keys on the console keyboard. Also, you can configure the
DIP Switch on the back panel of the PC Switch 6000 to set the
scanning interval (see next section for DIP Switch Settings).
Press the SELECT button:
Press the SELECT button and hold it over one second.
The SCAN LED will light on with two beeps.
To stop the SCAN mode and return to Normal operation,
press the SELECT button and release it within one second.
The SCAN LED will be off.
Press the HOT keys:
Press and release the HOT keys (Ctrl, Alt and Shift) on the
console’s keyboard simultaneously. Followed by entering
the number 0 and press Enter.
For example: Ctrl + Alt + Shift
è
0
è
Enter
To stop the SCAN mode and return to Normal operation,
press the Space bar of the keyboard.
Installation
The PC Switch 6000 can control up to 6 PCs. Proceed with the
following steps to setup the PC Switch 6000:
!!!
CAUTION
!!!
Make sure all the devices are powered off
when making connections.
To Setup the Console
1.
Connect the keyboard, mouse and monitor to the Console
section on the PC Switch 6000. And plug the power adapter
into the power jack.
To Setup the PC
1.
Connect the mouse, keyboard, and video (DB15/Female)
connector of the cable kit to the CPU-1 on the PC Switch 6000.
Then connect all the connectors on the other end of the cable
kit to the first PC.
2.
Repeat step 1 to setup other PCs.
3.
Turn on the PC Switch 6000 first, then the PCs.
