SIIG NN-EC2822-S1, Quick Installation Manual

Page: 3 / 12

3
Driver Installation
This section provides information on how to install the
FireWire 800 1-Port ExpressCard/34 drivers.
Windows 2000
Windows 2000 automatically installs it's built-in FireWire
400 driver for the FireWire 800 1-Port ExpressCard/34 . To
get the full speed out of this controller, install the Firewire
800 driver using the directions below.
1.
Insert the driver CD. Click Start, Run. Type
D:\setup.exe , click OK . (Change D: to match the
drive letter of your CD-ROM)
2. At the Welcome screen, click Next .
3. At the License Agreement screen, click Yes .
4. Type in your customer information, then click Next .
5. At the Destination Location screen, click Next .
6. Select Complete , then click Next .
7. At Program Folder screen, click Next .
8. At the Digital Signature screen, click Yes three times,
then click Finish .
9. Select the restart Windows option, then click Finish .
Windows XP
Windows XP automatically installs it's built-in FireWire
400 driver for the FireWire 800 1-Port ExpressCard/34 . To
get the full speed out of this controller , install the Firewire
800 driver using the directions below.
1.
Insert the driver CD. Click Start , Run . Type
D:\setup.exe , click OK . (Change D: to match the
drive letter of your CD-ROM)
2. At the Welcome screen, click Next .