SIIG JJ-E01111-S1, Quick Installation Manual

Page: 6 / 12

6
Windows Vista (32-/64-bit) / XP (32-/64-bit)
/ Server 2008 (32-/64-bit) / Server 2003 (32-
/64-bit)
1. Install the board and boot up Windows.
2. At the Found New Hardware window,
click Cancel. Skip this step if not prompted.
3. Insert the driver CD. Close CD autoplay
window if prompted.
4. Click Start , Run . Type D:\setup.exe , click
OK . (Change D: to match your CD/DVD
ROM drive letter)
5. At the User Account Control , click Allow .
Skip this step if not prompted.
6. At the Welcome to the PLX OXPCIe952
RS-232 Serial/Parallel PCIe Card Setup
Wizard , click Install .
7. At the Completing the PLX OXPCIe952
RS-232 Serial/Parallel PCIe Card Setup
Wizard , select Reboot now , then click Finish
to complete the installation.