4
4.
To install the card, carefully align the card's
bus connector with the selected PCIe slot on
the motherboard. Push the board down
firmly, but gently, until it is well seated.
5.
Replace the slot bracket's holding screw to
secure the card.
6.
Replace the computer cover and reconnect
the power cord.
Driver Installation
This section provides information on how to
install the
DP 1-Port RS232 Serial PCIe with 16950
UART
drivers.
Windows 8 (32-/64-bit) / 7 (32-/64-bit) /
Server 2008 R2
1.
Install the board and boot up Windows.
Note
: Windows 7 will automatically search
preconfigured driver folders for the proper
driver, this process may take several
minutes to complete. Do not interrupt this
process.
Summary of Contents for JJ-E01111-S1
Page 10: ...10 Blank Page...
