7
If PWD LED is not on, or any LED you expected is
not on, please recheck the cabling.
Connecting to Wireless Broadband Router
by Web Browser
After the network connection is built, the next step you
should do is setup the router with proper network
parameters, so it can work properly in your network
environment.
Before you can connect to the router and start configuration
procedures, your computer must be able to get an IP
address automatically (use dynamic IP address). If it’s set
to use static IP address, or you’re unsure, please follow the
following instructions to configure your computer to use
dynamic IP address.
Windows 2000
1.
Click
Start
, then click
Control Panel
.
2.
Double click
Network and Dial-up Connections
,
Local Area Connection
,
Local Area Connection,
then click
Properties
.
3.
Select
Internet Protocol (TCP/IP)
, then click
Properties
.
4.
Select
Obtain an IP address automatically
,
Obtain
DNS server address automatically
, then click
OK
.
