40
Media installation and removal
1
Put the media on the table.
If you want to use a dolly, contact us. We have a
recommend product.
2
Install the scroller fl ange into each end of the
media roll.
(1) Insert the scroller fl ange into each edge of the paper
tube.
Scroller fl ange
Roll media installation procedure
The installation method of the scroller fl ange varies with the type, weight and take-up direction of the media. See the tables
below to install the scroller fl ange correctly.
This section describes the installation procedure without using the scroller shaft.
For how to use the scroller shaft, see P.49.
General media
Media weight
Less than 35kg
35kg to 50kg
Media print surface
Inner take-up media
Outer take-up media
Inner take-up media
Outer take-up media
Flange spacer
Required
Required
Required
Required
Scroller shaft
Not required
Not required
Required
P.49
Required
P.49
Vinyl chloride media
Media weight
Less than 35kg
35kg to 50kg
Media print surface
Inner take-up media
Outer take-up media
Inner take-up media
Outer take-up media
Flange spacer
Not required
Not required
Not required
Not required
Scroller shaft
-
Not required
Required
P.49
Required
P.49
(2) Insert the fl ange spacer between the scroller fl ange
and the media roll.
Flange spacer
Note
When PVC media is used, push the scroller fl ange until it
stops without inserting the fl ange spacer.
The fl ange spacer should be inserted to the position
indicated by the line B.
Be careful not to deform it by applying too much force.
A
B
-
-