51
ENGLISH
Setting items
INK MENU
Menu
Outline of functions
XXX INK LEVELZZZ%
DATE:YY/MM/DD
INK LEVEL shows remaining ink. DATE shows the manufactured date of ink cartridge.
MEDIA MENU
Menu
Outline of functions
ROLL(XXXXXX)
YYYmm
XXXXXX: Media name
YYYY: Media width
SHEET(XXXXXX)
YYYYmm
XXXXXX: Media name
YYYY: Media width
FACE(XXXXXX)
YYYYmm
XXXXXX: Media name
YYYY: Media width
BACK(XXXXXX)
YYYYmm
XXXXXX: Media name
YYYY: Media width
NEST(XXXXXX)
YYYmm
XXXXXX: Media name
YYYY: Media width
MEDIA REG MENU
Menu
Outline of functions
#SELECT MEDIA
>XX:YYYYYY
Select the media number of media to be registered or parameter-corrected.
#RENAME MEDIA
>XX:YYYYYY
Name (register) the media number selected in [SELECT MEDIA]. Six (6) digits of character (or code) can be
entered for the media name. For character string of 6 digits, codes, alphanumerics and katakana characters can
be used.
#SMART PASS
>XX:LOW
Select the intensity for the auto correction function which ameliorates the print quality (unevenness, etc).
#DENSITY
>XX:NORMAL
Select a print density.
#PRINT DIRECTION
>XX:BIDIR
Select a print direction.
#USE EDGE GUARD
>XX:YES
Select whether to use the media edge guard or not.
#SKEW CHECK
>XX:ON
Select whether to perform a skew check when printing.
#MEDIA ADV MODE
>XX:FWD ONLY
Select a media advance mode.
#MEDIA BACK MODE
>XX:BACK & FWD
Select a media advance mode.
#SUCTION FAN LEVEL
>XX:HIGH
Select the force (air volume of fan) to suck the media to the platen.
#AFTERHEATER T
>XX:30°C
Set the afterheater temperature. However, when “**” is set, the postheater does not work.
#PRINTHEATER T
>XX:40ºC
Set the printheater temperature. However, when “**” is set, the print heater does not work.
#PREHEATER T
>XX:40°C
Set the preheater temperature. However, when “**” is set, the preheater does not work.
#COLOR STRIPE
>XX:ON
Select whether to print color stripes or not.
#PH HEIGHT VAL
>XX:+0.0
Adjust the print head height.
#PH CLEANING
>XX:START & END
To keep the print head condition, select a cleaning mode which is automatically performed by the printer.
#ADVANCE PREF
>XX:SOFTWARE
Select the media advance adjustment value priority.
#PRINT MODE PREF
>XX:SOFTWARE
Select smart pass, density and print direction priorities.
#HEATER PREF
>XX:SOFTWARE
Select the heater temperature setting priority.
#PH REST PERIOD
>XX:0000CYCLES
Scanning of the print head rests at every certain print length during printing. Set this time period to prevent
missing dots when printing. Normally, set it to [0000CYCLES].
#PH REST TIME
>XX:10sec
Corresponding to [ PH REST PERIOD], set the scan rest time. When [0] is set for [PH REST PERIOD], this parameter
is ignored. Set this rest time to prevent missing dots when printing. Set it to [10 sec] as a rule of thumb.
#MEDIA ADV VALUE
>XX:YYY.YY%
Set MEDIA ADVANCE VALUE. Set the advance value so that the banding (horizontal stripes of path splicing) is
not visible.
