IP-7900-02/-03/7700-02/03 Advanced Operation Guide
7
Before adjustment and calibration
Before adjustment and calibration, perform the operation below.
(1) Forcedly set the media heater to ON to warm up the Printer for 30 minutes or more.
Start the adjustment only after confirming that the Printer is warmed up sufficiently. The adjustment may not
be performed correctly when the Printer is not warmed up sufficiently.
(2) Rotate the control pressure knob to "OPEN" and reinstall the media to adjust the print head height.
(3) Set the "#IMAGE IMPROVE." to OFF.
Procedure to set the smart pass technology
[#IMAGE IMPROVE.]
to off
1
á
I N K
M E D I A R E G
â
ß
M E D I A
M . A D V
à
Set the Printer to offline state and press the
key.
2
# I M A G E I M P R O V E .
> 0 1 : P A P E R
[
• • •
With the
key scroll to
[#IMAGE IMPROVE
].
3
# I M A G E I M P R O V E .
> 0 1 : L O W
Press the
key.
4
# I M A G E I M P R O V E .
[
0 1 : L O W
With the
key scroll to
[OFF]
.
5
# I M A G E I M P R O V E .
[
0 1 : O F F
Press the
key.
# I M A G E I M P R O V E .
> 0 1 : O F F
Adjust and calibrate the Printer
