SII IP-6600-01 User Manual Download Page 135

Page: 135 / 180

3-31

Section 3 Operation Panel Menu Operations

Example of parameter setting

In this example, a paper feed adjustment value will be entered.

(1) Select "FEED ADJUST" menu with the

and

keys.

(2) Press the

key and revise the parameter.

- Determine the paper feed adjustment value by printing the

paper feed adjustment pattern or according to our

information.

(3) Press the

key to display the massage.

(This message will be displayed at new registration only.)

(4) When the

key is pressed, the paper number 02 is

registered newly and "*" mark that shows the paper has already
registered is displayed. The display returns to (1) display.

Press the

key to stop the new registration. The display

returns to (1) display.

#FEED ADJUST

>02 : 099.80%

#FEED ADJUST

*02 : 099.80%

NOTE

#FEED ADJUST

>02 : ENTRY OK?

#FEED ADJUST

>02 : 099.80%

Menu Operations

Summary of Contents for IP-6600-01





















































































































































































Search results

Summary of Contents for IP-6600-01

Reviews:

Related manuals for IP-6600-01

Brands by name

Popular brands

SII IP-6600-01, User Manual

Search results

Summary of Contents for IP-6600-01

Reviews:

Related manuals for IP-6600-01

Brands by name

Popular brands