-
5
-
OPERATING PRECAUTIONS
Please follow the precautions below to enjoy and maintain the full performance of the
printer.
Q
Q
Q
Q
Using the Printer
X
Be careful not to drop or bump the printer on a hard surface.
X
DO NOT install the printer in direct sunlight or such areas. Suitable environment
for the use of the printer is as follows:
· Ambient temperature: 41
°
F to 104
°
F (5
°
C to 40
°
C)
· Relative humidity: 30 to 80
%
(noncondensing)
X
DO NOT install the printer near devices that generate strong electromagnetic
fields such as a copy machine.
X
DO NOT connect the AC cables of the AC adapter and the battery charger to the
same outlet with devices that generate noise.
X
DO NOT open the platen cover during printing.
X
DO NOT remove or reinstall the interface cable during printing or transmission.
DO NOT touch the connectors of the interface cable during printing.
X
DO NOT cut any sheets of thick paper or label paper with the paper cutter
installed in the paper outlet. Failure to follow this instruction may cause a cutting
error or make the cutting edge dull due to label paper adhesive sticking to the
cutter.
X
Switch the power off when not in use.
X
Clean the printer using soft, lint-free cloth. Do not use alcohol or other solvent.
X
Before use, always clean the terminals using a dry, soft, lint-free cloth. If the
terminals are dirty, it may not be possible to obtain proper contact.
X
The AC adapter, the battery charger and the battery pack may become warm
when in use. This is normal and is not a malfunction.
X
When the battery pack is used at low temperature, the length of time the printer
can be used may be shortened.
X
When printing with high print rate is performed on thick papers, uneven printing
may occur and the sound during printing may become louder. However, since this
symptom is caused by the type of paper used, it is not printer trouble.
