-
17
-
(4) If the message shown at the right is printed, press the FEED button.
[SETTING MODE] Yes: Feed SW / No: Power SW
HINT
•
If you press the POWER button, the printer leaves the function setting
mode and turns off.
•
If you do not press any button within 30 seconds after a message is
printed, the printer turns off.
The printer is now in the function setting mode. You can set functions by pressing
buttons.
Q
Q
Q
Q
Changing Settings
In the function setting mode, you can initialize or modify settings. To set the settings
to defaults, perform operation (1). To change settings, perform operation (2).
(1) Initializing software DIP switch settings
1. When the message shown at the right is printed in the function setting mode,
press the FEED button.
Load Default Setting? Yes: Feed SW / No: Power SW
2. When the message shown at the right is printed, the printer turns off. The
settings are set to defaults. Initialization is complete.
Default Setting Saved.
Setting Mode Finished.
(2) Changing software DIP switch settings
When the message shown at the right is printed in the function setting mode,
press the POWER button.
Set the DIP switches as follows:
Load Default Setting? Yes: Feed SW / No: Power SW
